1.) Chocolate moulding for solid and filled chocolateManufacturer: Carle Montanari
Type: Confiseur CC 275
Moulds: 275 x 205 x 28 mm high
Output: ABT. 10 moulds/min.= ABT. 250 kg/h
Available for sale around July 2010
Can be seen running under power with product
At least one set of moulds will be included
Price: € 165.000,-- EX location Europe.
2.) Complete Used Potato chip plant overhauled, incl. New switchboardManufacturer: Type FMC-Levatti
Output: 300-400 kg/h according to the product and recipe,
Space required: ABT. 32 m long x 2,2 m wide
Plus heat exchanger + switchboard to be positioned on side.
Year of construction 1990
Price: a.) € 140.000,-- EXW Germany "as it is". b.) € 300.000,-- EXW Germany, OVERHAULED.Warranty: 1 year on all parts to be renewed.
3.) 1 Wooden Pallets Production LineBj. / built: 1988 –never used.
1. Type ZNT - pre-poster limb for striking of board and wood
Exists of 3 rails
1 Support with 9 input stations
Length 6.5 metres
2. Type ZDT - poster limb for striking of ready palette
1 Support with 17 inputs and impact of nail
4 saws 1.1 kW 2800 revos-6 of milling machine 1.5 kW 2800 revos
Total length 4.5 +7.5 m
Of 3. Conveyor belts
Price: € 110.000,-- EXW Poland. 4.) Complete running Tube Mill Which contains Mill and other processing equipment
And upper street level warehousing incl some fairly lavish offices.
General Data (All sizes in millimetres )
Make: Takashima, Japan M2.5, Man. 1994
Tooling: Handrail 55 x 50*
Federation Tube*
Half-round*: 30 x 20
40 x 30
55 x 40
Rounds: 16, 19, 25.4, 31.8, 38, 51, 63.7
Squares: 19, 25.4, 31.8, 38, 50
Rectangular: 38 x 25.4, 50 x 25.4
Oval*: 31.8 x 17.5
Flat Ovals*: 50 x 16, 32 x 16
Strip thickness: 0.76mm to 2.2mm
Material Grades: Mild steel; hot rolled, semi-bright and galvanised.
Current overall length: 3000mm to 7320mm
Running Speed: 60 metres per minute.
Major Equipment: Uncoiler- 5 Ton Cap. Max. dia. 1500mm, Made in USA
Shear Butt Welder- Guild International Mod. ME-165-12 Made in USA
HF Welder- Takashima VT150-400kHz, 150 kw
Thermal Spray Coating- Sulzer-Metco Valu-arc 300E tube mill system.
Cut-off- Takashima Fraction Saw, Steel Blade
Dedimpler- Lemont, all sizes up to 2mm wall thick.
Packing Table- Pack size 550 x 500
Also: Twisted Tube machine, Hammer finish machine, Sliding gate rail former,
Glass Handrail roll former, stainless, gal, mild steel.
Price and details on serious request 5.) Complete Cattle Equipment "BANSS"Capacity: 60 cattle / hour
Fabricator: Banss
Year of manufacture: 1996
Condtion: Excelent
Price: € 598.000,-- EXW Germanyincluding dismantling and loading to the containers
Load capacity: 8 - 9 Containers
Sea packing cost: each container 2.000 € (Option)
6.) Complete Cattle Slaughter & Processing Line "BANSS"Capacity: 60 cattle / hour
Producer: Banns (slaughter line)
Built in: 1993/94
Condition: excellent
Price: € 2.000.000,-- EXW GermanyDismantling cost: (Option) 400.000,-- Euro
Sea packing each container: (Option) 2.000,-- Euro
Shipping cost: each rent container CIF any container port
India (Option) Inlcuding customs documents 2.990,-- Euro
Capacity: ca.70 - 80 Container each 40"
7.) 1 Used Sheep Slaughter Line(Capacity: 300 sheep per hour)
(Year of manufacturing: 2006)
Sheep slaughter line for up to 300 sheep per hour, suitable for ritual slaughtering,
Restrainer: The restrainer transports the sheep forward and upward, towards the slaughtering box.
Slaughtering box: Rotating slaughter box, here the sheep are cut in accordance to Halal or Kosher regulation.
The sheep are transported onto the slaughtering conveyor.
Dehider: The dehiding machine makes it possible to easily remove the skin from the sheep
for high capacities.
Cutting, evisceration and inspection is done on the different platforms.
Price: € 398.000,-- EXW Germany "as it is"8.) 40 pcs. DOUBLE HOUSESKits from ferro-concrete - to finished parts for Production
of semi detached houses and terrace houses
From a company shut down we offer complete
Kits for 20 double or 40 terrace houses from ferroconcrete,
consisting of cellar, ground floor, upper floor and attic.
Price: € 33.000,-- for each single house EX Works9.) 3 COACHES (travel buses) (A, B, C below)A.) Bus VDL BOVA FHD 127.365, initial registration 07.09.07, run 220.299 Km,
266 kW, 9.186 cm³ Diesel, 18.900 kg total weight, 2 axles, 57 seats, leg room approx. 27 cm,
Euro 4, navigation VDO DAYTON PC 5200, air conditioner Bova Futurair, 2 TFT-TV,
Kitchen, WC, ABS, manual transmission, HU (next government security inspection
in order of German law) 09/10, length approx. 12.700 mm, width approx 2.490 mm,
little impacts by stones in front window, no folding tables, no feet rests, no inspection book.
Expected price: € 180.000,--B.) Bus BOVA Futura FHD 13-380, initial registration 07.01.04, run 614.645 Km,
280 kW, 12.580 cm³ Diesel, 18.000 kg total weight, Fg-Nr. XL9AA38P331003077, 2 axles, 58 seats,
leg room approx. 24 cm, Euro 3, navigation VDO DAYTON, air conditioner Bova Futurair, 2 TV,
DVD-Player, trailer coupling, kitchen, WC, ABS, heater, tempomat, retarder, manual transmission,
little rust at front left, (next government security inspection in order of German law) 01/11,
folding tables, driver door lock has a little defect, last overhaul was at 10/04 with 86.000 km
Expected price: € 124.000,--C.) Bus BOVA Futura FHD 14-430 Magnum, initial registration 22.05.02, run 653.209 km,
315 kW, 12.580 cm³ Diesel, 24.450 Total weight, 3 axles, 62 seats, leg room approx. 29 cm,
air conditioner Bova Futurair, 2 TV, DVD-Player, Euro 3, navigation VDO DAYTON, ABS, tempomat,
retarder, kitchen, WC, manual transmission, mirror electrical, little rust at the doors,
no folding tables, no feet rests, no inspection book
Expected price: € 106.000,--Location: Germany.
10.) 1x LIFE- HELICOPTERincl. full equipment
Typ: EUROCOPTER EC 135 Rescue
Built: 1999
Flying: ca. 2500 hours
Location: EUROPA Spanien
Condition: very good.
Colour: yellow.
Price: € 2.995.000,-- EX Location.11.) Used HOSPITAL Equipmentfor 100 patients
for the following sections:
Eye clinic, Orthopaedy, Surgery, Neonatalogy
Price: € 2.150.000,-- EX Works Belgium.Packing: approx 10 x 40ft Container.
Guarantee: 6 months (very good condition).
Experts for installation and supervising available.
12.) Complete inventory 1 Surgical Practise ClinicThe medicine-technical devices and the whole high-quality equipment come from 2002 - in 2003
and are checked before the sale once again to MPG and receive suitable new certificates.
The whole equipment would be used only maximum four years.
All wooden pieces of furniture are a single manufacture and pass of furniture construction - to record
materials of the grade E-1. The surface of the equipment is from a high-quality wooden decoration in pear
tree (wood reproduction, Melamin-resinous coating) and for a long-term use.
Beside the listed positions contain the offer everything what belongs to a furnished practise (e.g., pillow, beds,
bedclothes, OP-laundry, container, phone arrangement, fax machine, donator following disinfectant, paper
towel dispenser, mirror, foils for welding apparatus and a lot more).
The practise inventory is also suited for the surgery, the orthopedics and other surgically active fields.
Price: 540,000 € of EXW GermanyAll parts expertly diminished and stored.
Cargo volumes approx. 7-8 pieces 40 FT-container
Full list and pictures on serious request
13.) Gardner-Denver natural gas compressor package ( skid mounted) Built: 1998 - in like new condition with only 48 hours of actual use.
This Compressor is used in a gas turbine fuel booster application for compressing natural gas from various
sources for constant discharge pressure, required by a natural gas fired combustion turbine-generator for
generating electricity. This fuel gas booster compressor ensures a continuous supply of fuel gas at a specified
discharge pressure to the turbine-generator, where the volume of fuel gas required is dictated by the electric
power demand on the system.
A COMPLETE SKID MOUNTED SYSTEM USED TO BOOST NATURAL GAS PRESSURE TO 3,200 SCFM
with pre-filter & aftercooler. performance: (gas type: natural - sg 0.65146)
suction pressure: 380 psia discharge pressure: 650 psia 3,200 scfm
Price 37,000 USD From February 2010 circular:
A1.) VIOLA Brand baby diapers line Mod. T.M.P. 00400 Year of installation: 2002
check-up, installation at client's plant: € 940,000.--
A2.) 1 used Processing Line for Melted-CheesePrices: € 295,000.-- complete as above Reconditioned EXW Germany.
A3.) 1 NEW MOBILE DRILLING AND WORKOVER RIGFor Oil, Gas and Water drilling.
Price: € 5.250.000,-- EXWGermany, without packing.
A4.) Injection Molding MachineManufacturer: Battenfeld
Price: € 398,000.-- EXW Germany overhauled
A5.) Blow Moulding MachineType Sidel SBO 4/4 S1, purchased new in 1996,
Price: 495,000.- Euro as where it is
A6.) Used Tractor Heads MAN (revised offer)ALL TRUCKS WITH NEW TIRES AND INSPECTED !
Quantity 100 Stk.
19,800.- Euro piece EXW
A7.) 4.700 pcs. Truck Tires (retreading) for trailersin different Brands, as Michelin etc.
Price: € 150,-- per piece EXWGermany,
没有评论:
发表评论