2011年1月22日星期六

Stock List for Used Forklift Japan / 2005 ADM 300 TPH Asphalt Plant / KOMATSU WA70-1 #14590 / CAT D9N-1JD2000up / TADANO TL151 #30-8340 / 42 MGA WHT Power plant Full turn key project/ HITACHI FK150 #350-0160 / KOMATSU PC200LC-6LE: USA / CAT 980C WHEEL LOADER: USA


Great  condition 966D just arrived today from completed project

 
Brand: Caterpillar
Model: 966D
Engine: 3306
Location: Shanghai, China
Working hours: 8000
In good working condition
 
Only 51,500 usd . 
Shipping fee to Karachi around 1300$.
 
 
CAT 980C WHEEL LOADER: USA
YEAR: 1990,SERIAL NO: 63X01045, PRICE: 62,500 USD CIF (IN CONTANER)
 
CATERPILLAR 950F-2: JAPAN
YEAR 1997,BUCKET CAPACITY 3.1m3,WEIGHT 16550kg,ENGNE CATERPILLAR 3116TA;
172ps; 38 300 cc;WORKING HOURS 5619, PRICE  & PHOTO FOB JAPAN ON REQUEST
 
 
KOBELCO LK350Z WHEEL LOADER: JAPAN
YEAR: 1997, SERIAL:RG05184,KAIHO PRICE & PHOTO :FOB YOKOHAMA 40HC PRICE FOB JAPAN ON REQUEST
 
Komatsu  Motor Grader GD405A-2 JAPAN
YEAR: 1987,S/N: 1287,Hours.   420 hrs, Good working condition. Photos on request Special PRICE -EX-Kobe Yard, Japan on request.
 

Used Truck Mounted Aerial Platform TAIWAN
Tadano AT180S,S/N: HC5017,1995Y,right-hand drive. Price will be given on request.
RUBBERMAID FRAMEWORKS SHEDS LARGE LOT

We have a large lot of Rubbermaid Frameworks Sheds for sale. Retail $3999.00


REDUCED Price $999.00 each. 

 
 

CATERPILLAR M316C WHEEL EXCAVATOR:

 

YEAR: 2004,SERIAL NO: CATM316CKBDX00600,

HOURS; 8300,

 PRICE:67,000 USD FOB

 

More pictures and other information on request.

 
SUMITOMO SC500-2 #SC050-1176 
Year : 1994
Hour : 9303
Hook : 50t and Ball
Boom : 33m (Top, Base, 6mX3, 3mX1)
 
Please kindly quote your best offer many more photos on request
 
 
KOMATSU  PC138US-2  #2646
Year : 2001
Hour :5972
Condition as it is
FOB YOKOHAMA USD38,500
 
 
KOBELCO 7080 #GK-00220
 More photos on request
Year : 1992
Hour : 7994
Hook : 80t and Ball
Boom : 50m (Top, Base, 3mX1, 6mX1, 9mX3)
Condition as it is
Please kindly quote your best offer
 
NISSHA DH900D #D95902
 
Year : 2000
Hour : 5069
Hook : 90t, 50t and Ball
Boom : 47m (Top, Base, 6mX1, 9mX3)
Looking for offer , more photos on request
 
 
Toyota Land Cruiser 200 VX 4.5 lt Diesel A/T - Full Option

 

 Land Cruiser VX Diesel Automatic vehicles now in Istanbul and Antwerp stock with various color options furnished with beige or gray interior colors. 
These vehicles come with highly furnished interior equipment including GPS, EMV, blue-tooth, whereas its exterior is garnished with power sunroof, roof rails and rear spoiler.
 
 We offer these fully loaded VX vehicles with very special prices, let us know how many you maybe interested in and destination port for best quote .

Please see below for further details of specifications:

MPID1250 - Toyota Land Cruiser 200 VX 4.5 lt Diesel A/T (2010 MY)

Interior:
9 inch type DVD, GPS (Global Positioning System), back view monitor, EMV(Electro Multi Vision Display), alarm, audio controls on steering wheel, blue-tooth system, cool box, heated front seats, overhead console, power and tilt steering, power r door locks, power seats front , power sunroof, power windows, rain sensor, smart entry, steering wheel telescopic, Upholstery: leather, Audio  system: DVD, 9 speakers, Audio system: 6CD changer, Leather gearshift knob. 
 
Exterior:
Alloy wheels, body colored bumpers, floor mounted spare wheel, foglamps front, headlamp cleaners, lift-up type back door, park sensors, power and heated outside mirrors, roof rails, side step, spoiler rear.
 
Safety:
ABS, airbagx2, brake assist system, curtain airbags, side airbags, third brakelight, knee airbag.
 
 Technical:
KDSS (Kinetic Dynamic Suspension System), ATRC (active traction control), cruise control, DAC (Downhill assist control, EBD, fuel heater, HAC (Hill-start assist control), immobilizer, push start, Crawl system.

Air Condition:
• AC Type: Automatic air conditioner
 
 Dimensions:
• Tyres: 285/65R18

Engine:
• Engine size: 4.5lt.
• Cylinders: 8
• Fuel type: Diesel
• Power: 232hp
• Torque: 62.7Kg.m(SAE NET)
• Transmission: Automatic
• Traction: 4x4
• Doors: 5
• Seats: 7
Model Year: 2010
 
 

KOMATSU PC200LC-6LE: USA

YEAR: 2000,SERIAL NO; A85170,ENGINE ,S6D102E-1(KOMATSU)HOURS; 6,300,good bucket with Thumb that is like new, 

Machine in good condition,no smoke, no blow by, tight rotec bearing, Track group:  Rollers, sprockets and

Idlers are 50% wear remaining, pins and bushings are 20 percent wear remaining, grouser pads are 60%

Wear remaining, PRICE;  54,500 USD CIF (in container)

 
 
HITACHI FK150 #350-0160

Year : 1978
Hour : 7085
Km : 46227
Hook : 35tball

Boom : 51m (TopBase 6m X 63m X 2)
FOB Yokohama USD60,000
 
 
See attached listing of available fork lifts in Japan , please quote unit/s of interest for price.
 
 

Telescopic handlers

Chariot Télescopique

Teleskopstapler

телескопический вилочный погрузчик

 JCB 537-135

 JCB 537-135

 JCB 537-135

 JCB 537-135

Year : 2000

Année : 2000

Baujahr : 2000

Год выпуска : 2000

4x4x4 ( four wheel steer )

4x4x4 

4x4x4 Allrad

формула колес : 4x4x4

ENGINE : PERKINS  TURBO

MOTEUR : PERKINS TURBO

MOTOR : PERKINS TURBO

PERKINS  TURBO

Hours : 5000

Heures : 5000

Betriebstunden:  5000

моточасов  : 5000

Rated load capacity  3700KG

Capacité de levage 3700 kg

Nutzlast  3700 kg

Грузоподъемность 3,7 тонны

MAXIMUM LIFT HEIGHT: 13,5 meters

Hauteur de levage: 13,5  mètres

MAX. HUBHÖHE: 13,5  Meters

Подъемная высота: 13,5  M

Extra hydrolic lines

Extra Ligne hydraulique

3. Steuerkreis

Extra hydrolic lines

Forks 

Fourches 

Gabeln

вилы для поддонов

2 stabilizers

2 stabilisateurs

2 Pratzen, Stabilisatoren

2 x стабилизаторы

Tires:60% GOOD

Pneus:60% BON 

Bereifung 60% GUT

остаток резины  : 60   %

Tidy machine

Bon Etat

Gut Zustand

Состояние: Отличное

Export Price

Prix export

Export Preis

Eкспорт цена

€ 17900

€ 17900

€17900

€ 17900

 

 
Price verification
 
Fantastic opportunity
Back on market due to buyers failure to proceed
42 MGA WHT Power plant Full turn key project ONLY Euro 35 Mil
Duel fueled
Full offer in 8,000 kb PDF on request
 
 
TADANO TL151 #30-8340
Year : 1980
Hour : 1790
Hook : 16t
With Generator and spare tire
FOB Yokohama USD46,000
 
 
 
CAT D9N-1JD2000up
Giant ripper
18194hrs
Good operated
Price : USD105,000  Ex  Yard.
FURUKAWA FL200 #1107

Year : 1989
Hour : 4374
Condition as it is
FOB Yokohama USD 19,900
 
 
 
KOMATSU WA70-1 #14590
Year : 1994
Hour : 2788
Km : 5116
FOB Yokohama USD22,000
 
 
KOBELCO SK120-2 #LP12400
Year : 1995
Hour : 8589
FOB Hakata, Japan USD31,000
 
 
KOBELCO SK200 #YN-20095
Year : 1994
Hour : 6265
FOB Yokohama USD42,000
 
 
2005 ADM 300 TPH Asphalt Plant

  2005 ADM 300 TPH Asphalt Plant

This plant's 225 tph production rate is based on the following conditions: 275°F fan gas temperature, 300°F material temperature, 70°F ambient temperature, 650' above sea level, 50% excess air, 10% casing losses, 5% leakage air, 5% moisture removal, 5% liquid asphalt, 20% minus #8 materials. Variations to these specifications will result in an increase or decrease to the stated capacity.

MM225 Dryer

7' 4" diameter x 30' long rotary drum. The shell is manufactured from 1/2" thick A572 steel.
Two (2) dryer tires constructed from 1045 alloy steel, quenched and tempered to a 200 Brinnel, forged one piece and seamless are factory mounted. Tire support pads are placed between the drum tire and drum shell.
Four (4) adjustable trunnions with spherical roller bearings. Trunnions are hardened to a 50-60 Rockwell and driven by shaft mounted gear reducers & 20hp x 180rpm motors.
Two (2) oversized guide rollers ensure total tire/trunnion surface contact.
An alternating flight design providers for a high efficiency material veil, reducing operating costs. Flights are staggered for maximum heat transfer. All production flights are bolted in.
The discharge breeching has a chrome carbide lined discharge chute feeding material into the mixing drum. An exhaust gas incineration collar is mounted to the discharge breeching, around the burner tube. This provides for the introduction of mixing drum gases for incineration of blue smoke and assisting in the combustion process. High temperature drum seals are stud welded externally onto the back of the discharge breeching minimizing leakage air.
The exhaust breeching located at the feed entry of the drum provides for duct transition and velocity reduction. A manhole access is provided with quick release clamps. High temperature drum seals are stud welded externally onto the back of the exhaust breeching minimizing leakage air.
Main frame is constructed from heavy duty I-beams with support legs to grade.

MM225 Mixer
6' diameter x 16' long rotary drum. The shell is manufactured from 3/8" thick A572 steel.
The exterior of the mixing drum has 1-1/2" thick insulation covered with a 16 gauge steel wrap.
Two (2) dryer tires constructed from 1045 alloy steel, quenched and tempered to a 200 Brinnel, forged one piece and seamless are factory mounted. Tire support pads are placed between the drum tire and drum shell.
Four (4) adjustable trunnions with spherical roller bearings. Trunnions are hardened to a 50-60 Rockwell and driven by shaft mounted gear reducers & 15hp x 1800 rpm motors.
Two (2) oversized guide rollers ensure total tire/trunnion surface contact.
A staggered, adjustable flight design provides for maximum mixing efficiency and consistent mix quality. Flights are bolted in for ease of adjustment or replacement.
Discharge breeching has a chrome carbide lined discharge chute feeding material into the drag conveyor. A gas recovery fan is mounted to the top of the breeching and incorporates an outlet damper to evacuate the steam and blue smoke. These gases are channeled back around the burner flame to incineration, which also reduces fuel consumption.
Main frame is constructed from heavy duty I-beams with support legs to grade.

Inlet (Slinger) Feed Conveyor
Fast feed slinger conveyor with 5hp x 1800 rpm motor.
Shaft mounted gear reducer.
Browning sheaves and belts with expanded metal belt guard.
Cema "B" troughing idlers.
Cema "B" Flat idlers for returns.
30" multi- ply conveyor belting.
Lagged head pulley.
Self-cleaning wing pulley with adjustable take-ups.
Heavy-duty C-Channel construction.

Ecoster ES75 Burner Equipment by Hauck Manufacturing Co.
75 million Btu/hr sealed in burner unit.
Combination burner with wide range of turndown.
Flow meter included.
Stainless steel ignition cone.
Adjustable flame shaping capabilities.
Dual scanner ports.
36osi high-pressure atomizing blower with 15 hp x 3600 rpm motor.
Intergral burner fan with 50hp x 1800 rpm motor.

MM225 Asphalt Pumping System
Viking 90 gpm dual mass flow pump system.
7.5 HP AC 1200 rpm motor with variable frequency drive.
Browning sheaves and belts.
Hinge down belt guard over drives.
Three-way jacketed valve mounted to metering pump.
Pneumatically operated three-way valve with cylinder, valve, and all electrical components.
Indicating (2) circuit limit switch with status light, displaying liquid asphalt pumping direction.
Adjustable motor mount, for belt tensioning.
Temperature compensation with probe, factory mounted.
60 pulse per revolution digital tachometer feeback, factory mounted in a 10' x 8' Nema 4 enclosure.
Skid mounted onto a rugged steel base. Factory assembled and piped with stainless steel hot-oil jumpers.
All high voltage wiring will be terminated to separate enclosure mounted to the pump skid.

MM225 Fuel Oil Pumping System
12 gpm fuel oil pump assembly with 2hp x 1800rpm motor.
Duplex filters with independent ball valve shutoffs.
Ful-Flo pressure regulator with pressure gauges.
Factory piped and mounted on a metal base.

Automatic Damper Control
Photohelic differential pressure switch/indicator for automatic exhaust damper control.
Manual override enables the operator to open or close the damper without the use of automatics.
Controls the amount of excess air.
Variable set point adjustment.

Dual Fuel Burner
Natural gas & #2 fuel oil.

Control Room
8'-0" wide x 16'-0" long x 8'-5" high operators control center.
All steel welded frame construction including wall studs, floor and ceiling joists, All steel work is prime coated; All exposed steel is painted.
Sidewall construction is a combination of exterior siding, 2" rigid insulation and 7/16" interior wood paneling.
Vertical pattern steel siding by Wheeling Corrugating Co. Prepainted 90,000 psi high tensile steel siding offers maximum strength and resistance to wind damage with a minimum of potential maintenance. Monocoque wall construction utilizes the exterior steel siding as a strength member.
36" by 80" insulated heavy duty 24 ga. Steel clad entrance door with keyed lockset, chain style door stop and double pane insulating window.
Suspended 24 inch square textured Armstrong acoustical ceiling panels with 4 tube surface mounted fluorescent light fixtures.
Ceiling cavity is filled with 6" of R14 Fiberglass batt insulation.
Sidewalls are insulated with rigid R8 insulation, installed to minimize heat loss/gain and sound transmission. Insulation provides 100% backing to both the exterior and interior panels.
1 piece, no maintenance, black rubber roof.
7/16" thick Georgia Pacific woodgrain interior paneling.
Easy maintenance 12 inch square Azrock Vinyl composition tile floor over 3/4" T&G plywood subfloor.
Virtually 360 degree visibility with over 135 square feet of tinted, 1/4" plate safety glass. Windows are angled to minimize dirt or moisture accumulation and to minimize noise reverberation. Window slope is typically 3" from top to bottom.
Drip caps and galvanized flashing are provided as necessary to prevent the entry of wind driven rain.
17,800 BTU window style air conditioner/heater.

Plant Control System
Operators control console.
PLC based control system.
Status indicating lights.
Main motor control center located on plant frame. Includes motor starters & circuit breaker protection.
Similar ticket and display formats to simplify operation.
Default data entry automatically enters all data last used by selected truck.
Assisted copy feature copies previous ticket data to current truck entry with single keystroke.
Pop up customer memo file.
Weigh-in/weigh-out capability to capture gross weights/tare weights and store/print ticket on demand.
Cash sale tickets printed.
Correction tickets stored or printed.
Copies of previous tickets printed.
Individual free fall value compensation.
English or Metric units.
Silo inventory. Reverse weighing systems, silo weight is measured in bar graph and numerical form.
Full featured ticket printing using up to 5 part preprinted or plain paper forms.
Printed summary reports include material/mix, truck, customer and job reports.
Truck file retains latest truck loading parameters.
Ticket file retains entire ticket record, view or print.
Job files; unlimited ten digit alphanumeric customer numbers, four lines of description, 35 characters per line.
Customer files; unlimited ten digit alphanumeric customer numbers, 4 lines of descriptions, 35 characters per line.
Material/Mix file; 100-material/mix description of 20 characters each including a separate price for each material.
HARDWARE
Pentium class IBM compatible computer with < 1-Gbyte hard disk drive for permanent data storage.
Programmable Logic Controller (PLC) plant interface.
IBM compatible VGA color display monitor.
IBM compatible printer.
Digitizer, stand-alone NTEP certified commercial grade scale weight indicator.
Line stabilization transformer.
Manual override for silo/batcher controls.

BHS525-10 Stationary Baghouse
DESIGN
47,000 acfm air volume.
+/- 30"wg pressure rating.
250-350°F air temperature.
15-20"wg operating vacuum.
260ft/min can velocity nominal.
9,185 ft2 filter area.
5.1:1 air-to-cloth ratio.
36scfm @ 80-100psig w/15sec off time, normal.
90scfm @ 80-100psig w/6sec on time, maximum.
CONSTRUCTION
All welded sub-assemblies
Internal grid just above the hopper to act as bag catch.
Flanged air inlet & outlet.
Flanged hopper discharge to screw conveyor.
Hopper access port over each screw conveyor joint.
Lift off roof doors & hopper access plate w/silicon sponge rubber gaskets rate for 350° F.
Perimeter roof rails & caged ladder to the roof.
Girth channel for continuous support on the four (4) sides of the dust collector welded at the hopper bin line.
Schedule 40 internal air piping.
Compressed air header assembly mounted at the mid-rail.
Die-cast aluminum diaphragm valves.
Brass solenoid valves, 115/1/60.
Solid state sequential timer, 115/1/60.
NEMA-4 enclosures for the solenoid valves, plus the solenoid valves are pre-connected to their respective diaphragm valves using "polyflo" tubing.
NEMA-4 enclosure for the timer & photohelic mounted on plant.
Differential pressure gauge/switch, Dwyer photohelic type 0-10"wg.
Air header pressure gauge, dial indicating, 0-220psig.
Presstite gasket at the tubesheet flange.
Carbon steel galvanized cages, 11ga, 10 vertical wires, 8" horizontal ring spacing, flanged top w/integral venturi, solid pan bottom shipped loose for field installation.
Full set (585 bags, 6" diameter x 10' long) of 15oz 100% Dupont Nomex felt filter bags shipped loose for field installation.

Flow Detectors on Each Bin
The detectors are mounted in the discharge opening of each bin. Through the use of visual and audible alarms, they alert the operator to an interruption of material flow.

Tach Feedback to Each Bin
Mounted to the tail pulley of each bin feeder, the tachometer transmits belt speed to the blending computer for accurate proportioning control.

WC3050 Weigh Conveyor
The 30' wide x 50' long weigh conveyor weighs and transfers material from the scalping screen to the drum fast feed conveyor.
The receiving chute has a heavy 1/2" rubber skirt board to keep material spillage to a minimum.
The weigh conveyor has a lagged head pulley and self cleaning, adjustable tail pulley and is driven by a 10 hp x 1800 rpm motor.
The collecting conveyor has a 4" diameter, 35° troughing rollers on 4' centers and 4" diameter flat return roller on 10' centers.
The spring tensioned belt cleaner is mounted to the head pulley of the weigh conveyor.
The drive has an open mesh belt guard for safety and ease of visual inspection.
The wright bridge assembly consists of a 150kg loadcell mounted to a heavy-duty idler
A gravity take-up with 12" diameter pulleys provides for consistent belt tension and is located directly below the belt scale.
A wind guard is mounted adjacent to the weighing span to minimize the influence that wind gusts may have on the weighing process.
A speed sensor is mounted on the gravity take-up pulley to provide derivative feedback to the blending system.
A 48" wide x 8" long single deck scalping screen is provided for rejecting oversized material. The screen deck is powered by a 2 HP motor.

2 Silos SS200 Stationary Silo
The silo has a capacity of 200 tons based on material having a density of 120 lb/ft3.
The double walled deck section is continuously welded to the silo barrel. Eight inches of fiberglass insulation is installed with in the deck section. The exterior surface is covered with 1/4" safety deck plate and the perimeter of the silo deck is surrounded with handrailing.
A 20" diameter access port on the silo deck provides access to the internal ladder, which is welded to the silo barrel.
A 6,000-LB batching hopper with dual clam gates maximizes use of barrel volume while minimizing segregation.
The diameter of the silo barrel is 11'-2" and the sidewalls are constructed with 5/16" thick steel plate, one hundred percent double welded.
The silo barrel extends vertically down past the cone section to the base of the silo section to provide a protective skirt. The 4" of insulation on the barrel is installed in two layers and overlapped for effectiveness in eliminating cold spots. The insulation is covered with pre-painted aluminum skin banded for added rigidity.
The silo cone is constructed with 3/8" steel and is continuously double welded to the barrel section. An AR Cone liner is provided to ensure long maintenance life.
A 60 degree tapered slope to a 30" diameter discharge opening maximizes free flow of material.
Hot oil, pressure tested, tubes area attached to the silo cone section to extend storage time. The hot oil system includes inlet and outlet shutoff valves and a check valve on the inlet side. The tubes are overlayed with 4" of insulation, which is in turn embossed with a stucco finish.
Dual clam gates provide rapid truck loading and segregation protection on discharge.
Heavy I-beam legs are bolted to the silo base and provide a 12' wide x 12' high drive through clearance.
High & low level indicators are provided which will activate alarms to alert the operator of a low or high condition.

400 Ton Drag Conveyor - New in 2009
The 32" wide drag conveyor is constructed from heavy duty casing and has a capacity of 300tph.
The conveyor uses a single 6" pitch heavy-duty roller chain with an ultimate strength of 140,000#.
Drag flights are fabricated with 3/4" steel and are 6" high. Flights are reinforced with bar stock.
The conveyor bottom is covered with 1/2" thick chrome carbide liner and the sidewalls are fitted with 6" tall x 1/2" thick AR400 liners.
The conveyor is driven by a 60-hp motor through a planetary gear reducer.
The drag conveyors adjustable head shaft is made from 4-15/16" diameter cold rolled steel. The segmented sprocket is bolted to a split hub. The sprocket is hardened to a 500 Brinell.
The tail shaft is made from 3-15/16" diameter cold rolled steel and utilizes a hand pumped hydraulic cylinder for ease of adjustment.
The spring-loaded bearings on the hold down idlers provide flexibility and increased maintenance life.
Hinged steel covers in 5' sections provide easy access to the conveyor for inspection and/or maintenance.
A pneumatically actuated by-pass on the bottom of the drag conveyor is provided for diverting unwanted material on start-up or when cleaning out the drum.
A platform is provided at the motor/gearbox level for ease of drive train maintenance. The full 360° platform is complete with hand railings and kick plate.
A skid resistant stairway with hand railing is provided along one side of the drag conveyor. From the stairway, either the silo top or service platform can be accessed.

ATC30 Coiled Asphalt Tank
TANK
The 30,000-gallon horizontal tank is constructed with 1/4" thick shell and 5/6" thick flat flanged heads.
Tank is included with support saddles and mounted on a heavy "I"-beam skid.
The tank is wrapped with 2" of insulation and covered with a stucco aluminum cover.
3" diameter fill, vent, return, and outlet pipes are provided as standard.
The bottom of the tank is coiled with 1800 lineal feet of 2" diameter schedule 40 pipe.
A capped outlet connection is furnished for draining the tank.
A 2-1/2" diameter dial type thermometer is provided for visual inspection of tank temperature.
A float type, mechanical level indicator is provided to indicate asphalt level inside of tank.
HOT OIL HEATER
Hot Oil Heater, equipped for No.2 fuel oil, full modulating power pressure burner rated at 1,410,000 BTU/hr maximum input and 1,227,000 BTU/hr output, for a 450°F maximum operating temperature.
CIRCULATING PUMP - self-cooling, high capacity, virtually dripless centrifugal type pump interlocked with burner controls and driven by a 5 HP, 3450 RPM TEFC (totally enclosed fan cooled) electric motor. Interlocked with the pump are a pressure control switch and a 5" dial pressure gauge.
CONTROLS - Controls are pre-wired, tested and located in a NEMA-12 enclosure. All necessary operating and safety controls include digital flame safeguard system, low oil level switch, high-temperature safety controls, pump pressure control, digital indicating temperature controller, fuel selector switch, OFF/PUMP/BURNER switch, ten (10) operating/indicating lights and thermometers for hot oil supply and return. Control voltage is 115/60/1.
FIREBOX AND HEAT EXCHANGER - Firebox is oil jacketed with forced circulation channeled for positive flow control of heat transfer fluid. After complete combustion occurs in the firebox, hot gases pass through the multi-pass fire-tube type heat exchanger to give a total of 110 square feet of heating surface.
EXPANSION TANK - Externally designed for total volume of 84 gallons of cool non-circulating heat transfer fluid. Complete with fill connection, overflow pipe, oil level sight glass, liquid level control and thermometer.
TEST - Heater is factory for eight (8) hours to ensure proper operation.
Heater is ready for heat transfer fluid (not included), electric power and fuel consumption (not included). Incoming power is 460/60/3.

Multi-Fuel Burner
Natural gas & #2 fuel oil.

Asphalt Transfer Pump
Skid mounted jacketed pump.
200gpm, 15hp x 1800rpm motor.
Controls and switchgear are mounted in a weatherproof enclosure near pump.

Flexible Hose Package
2-1/2" flexible hot oil jacketed hose 12' long with quick disconnects.
3/4" flexible hot oil hose, 12'long.
(4) 3/4" flexible hot oil hoses, 2' long.

MFS-500BBL Mineral Filler Stationary Silo
500-bbl capacity silo.
60° cone-to-square discharge transition.
4" diameter filler pipe mounted to silo, bottom-to-top.
Diffuser box with ceramic elbows for wear resistance.
3" diameter vent line-connecting silo to pod.
Bolt on manhole access located on silo top.
Support legs (4) to grade.
Air fluffing (aeration pad) factory mounted and pre-piped to air reservoir. Air required for aeration is furnished through a 3", 2 H.P. blower package as standard equipment.

Conveying System from Silo
Screw conveyor to convey material from weight pod to belt.
Rotary vane feeder drive & 1-1/2hpdc motor with controller.
Vane feeder (air lock) with air purge.
All controls including blend computer additions.

OSHA Caged Silo Ladder/Platform & Hand Railing Assembly

Static Baghouse
Provides efficient dust free venting of silo during continuous operation.

Weigh Pod w/Reverse Weigh
Pneumatically operated 8" slide gate with interconnecting flexible grommet connecting to pod.
Mounted (3) NTEP approved load cells sending signal back to on board blend computer.

Dual Shaft Pugmill for Mixing Hydrated Lime with Aggregates
Two (2) 4-1/2" square 4150 alloy mixer shafts with cast mixer arms and Ni-Hard tips.
Heavy duty roller bearings on the shafts protected by shaft seals.
Mixer box shall be constructed from 3/8" plate with clearances between the bottom, sides and tips to allow for the aggregate to wear on itself using "DAM" plates in the bottom.
Mixer box shall have a minimum of 3'-6' of mixing length.
Powered by two (2) 30 HP motors using shaft mounted gear reducers with v-belt drives.
Unit is equipped with air cylinder operated flop gate for use when not using lime.
All necessary switches are supplied and factory installed.

RAP12 Recycle Bin & Feeder System
12-ton rated capacity.
14' wide x 7'8" deep top opening.
Radial type gate with positive lock.
30" wide belt feeder.
10" diameter lagged head pulley with shaft mounted gear reducer & 5hpdc x 1200rpm motor.
10" diameter self cleaning tail pulley with take-ups.

RAP2465 Recycle Weigh Conveyor
24" wide belt x 55' long.
Channel type frame.
Receiving chute.
18" diameterlagged crown face head pulley, with shaft mounted gear reducer & 10hp x 1800rpm motor.
16" diameter self cleaning tail pulley.
35° x 4" diameter idler pulleys, 4" diameter return pulleys.
Weigh bridge with wind shroud.
Gravity take-up with weight box.
Electrical controls, computer additions & wiring.

Air Cannon

Single Deck Scalping Screen
36" wide x 8' long x 1-1/2" square screen x 5/16" thick wire.

CUSTOMER RESPONSIBILITIES
The following additional items will be required for placing the equipment into operation. These items are the responsibility of the customer.
To supply electrical power to M.C.C.
To supply fuel tank & connect a supply and return fuel line.
To supply main regulator and gas connection to burner.
To supply 100# propane tank & line.
To supply hot oil lines between tank & plant and insulate AC lines.
All receiving, unloading & storage of materials at job site
All equipment & labor necessary for erection & installation of equipment.
PE review/stamping of drawings
All supply & installation of foundations including anchor plates.
PE stamp on electrical drawings.
All electrical grounding as required.
All lighting equipment as required.
All building permits & approvals.
All construction & air permits and approvals.
All scaffolding, electrical power if required air testing.
All lubricants, heat transfer oil & hydraulic oil.
Certification of footings, installations, calibration of scales when required.
Additional requirements to make equipment operable and not specifically mentioned in this proposal.

SERVICE STARTUP POLICY
The company will furnish a serviceman to provide technical assistance in the erection and/or setting of the equipment furnished by the Company and to assist and instruct the employees of the Purchaser in the starting up thereof.

MOVING THE EQUIPMENT: Purchaser shall furnish the necessary facilities, labor and materials for conveying the equipment from the point of delivery to the site of installation, and placing same on point of erection and/or setting. The equipment shall be set and leveled by Purchaser.

START UP: Purchaser shall furnish at the site of erection and/or setting the following: All labor, equipment, fuel, water and electricity as required for starting the equipment.

Weaver Asphalt Lab Equipment Inventory
Lab is AASHTO certified and SCDOT certified and NCDOT certified comes with bathroom and two sinks
NCAT Ignition Oven
Complete Automatic Marshall Hammer with 4" molds and hot plate
Compression and Testing Machine with graphical read out with gyratory and marshall breaking heads
Garden spades/Flat spades
Hydraulic Jack with extractor jack assembly
Hot water bath and a cold water bath-with auto temp. read out
Maximum Gravity equipment (rice machine) - two bowls and two vibrating tables with Vacuum pump.
Certified Mercury Manometers
Role of nonstick paper
Large Masonry Saw
three Ovens
Fax and printer/phone/Computer
Sample Quartering table - Small splitter for dry materials
Large Sample Splitter with four buckets
One Large Gilson Shaker - one 12 inch sieve shaker
Two electronics balances
Five or more dial thermometers/Mercury thermometers
Brass wire brushes - four certified 50 lbs weighs for lime verification
Automatic material washer for gradations with wash #200 pan
AC heated container with temperature control
Large mixer with large pot for mix design
Pine Gyratory Compactor with four gyratory molds
File cabinets
Countertops with cabinets

Everything in the specs plus a bigger bag house, which increased production to 300 tons an hour, an extra 20,000 gallon vertical hot oil tank, plus a 12,000 gallon fuel tank. Also the drag conveyor is a 400 ton an hour drag bought new in March of 2009, can stand 1.5 to 2 million tons of asphalt, ran about 225,000 tons thru it in 2009. New price is approximately $1,600,000.00

$1,100,000.00 USA

 
 
Thai Long grain and other Thai Rice.  

We are in direct contact with the farmers and are involved socially.

Our associates infrastructure includes 2 Rice Mills in Thailand (Where the best rice of the world grows), with installed capacity to produce 15,000 Metric Tons processed rice every month.

Our major exports overseas are Singapore , Malaysia , Egypt , African sub continents, Middle Eastern Countries, European Countries, etc

Thai rice price as following

FOB Bangkok.  50 KG. PP Bag.           

1.Thai Long Grain Parboiled Rice 100% Sortexed                                                       USD 472/TON

2.Thai Long Grain Parboiled Rice 100% Sortexed 5%Broken                                       USD 462/TON

3.Thai Long Grain Jasmine  Rice 92% pure                                                                USD 902/TON

4.Thai Long Grain Jasmine Rice 80/20 Mix                                                                 USD 882/TON

Note: The above prices are valid till July 10, 2010.

Packing:

    For 25 KG we add extra

               $5/mTon

    For 10 KG we add extra

             $20/mTon

    For   5 KG we add extra

             $35/mTon

    For   1 KG we add extra

 $120/mTon in master bag


 

Minimum Order:  500 Tons

50 ton to 500 add $3 PMT.

Payment Term

We accept Documentary letter of credit (LC) at Sight.

Note: All the above terms of payment are at Mills discretion.

 
 
 

 

没有评论:

发表评论